impulse current generator sur 6ka | shanghai sosin electronics-九游会官网入口

product features

• ▪ 7 inch color touch screen;
  
• ▪ support multi language, convenient for different users;
  
• ▪ built in environment automatic detection program, automatically detect the test environment and remind users;
  
• ▪ rs232/usb interface, which can be controlled by pc and print test report.

product parameters

• product model:
  

  surge waveform
  

  maximum output current
  

  surge polarity
  

  output impedance
  

  surge triggering mode
  

  frequency
  

  i interval time
  

  working power supply
  

  ambient temperature

• sur 6ka
  

  short circuit current wave: 8/20 us
  

  6ka
  

  positive, negative, positive before negative, negative before positive
  

  0.5q、0.75q
  

  automatic, manual
  

  1~9999 times
  

  5~9999s
  

  ac220v 50/60hz
  

  15 ℃~35 c

product recommendation

single phase 8kv lightning surge generator sur s8

model：sur s8

the impact of lightning (indirect lightning) in nature and voltage changes caused by large switch switching in power supply lines on power supply lines and communication lines is particularly large, and the impact on products may be destructive. the lightning surge generator is used to evaluate the performance of the equipment when it is subjected to high-energy disturbance from the power line port and other signal line ports. the product meets the requirements of new standards such as iec61000-4-5 and gb/t17626.5.

learn more

impulse current generator sur 6ka

model：sur 6ka

the lightning surge generator sur 6ka is used to inspect the anti surge protection devices such as zinc oxide arrester valve piece, varistor, spd, tvs tube, gas discharge tube, etc. for surge impact test. the product produces 8/20us surge pulse waveform, and the technical indicators of the waveform comply with the provisions of national standards and iec standards.

learn more

three phase 6kv pulse group generator eft t6

model：eft t6

in the circuit, such as from the switching transient process (cutting off inductive loads, bouncing relay contacts, etc.), it will usually interfere with other electrical and electronic equipment in the same circuit. this kind of interference is characterized by high amplitude, short rise time, high repetition rate and low energy. clusters of narrow pulses can charge the junction capacitance of semiconductor devices, which may cause circuit or equipment errors when accumulated to a certain extent. the burst generator determines a common reproducible evaluation basis for evaluating the performance of power supply ports, signal, control and grounding ports of electrical and electronic equipment when disturbed by electrical fast transient bursts. the products meet the requirements of new standards such as iec61000-4-4, en60100-4-4 and gb/t17626.4.

learn more